3 in 1 Chemicals is a Ultimate Mild Steel Cleaner. It removes Oil & Rust and gives a protective coating against corrosion in one action . This product reduces the cost of zinc Phosphate and save lots of time. It works in Room Temperature .

                                                    isologo                                                                                                                                             contact us @ 09953478486
  • we also deals to job workrs
3 IN 1 CHEMICALS | RUST REMOVERS

Moisture and rusting made for each other
Due to moisture or exposure to sun, wind and sea, metal surfaces and metal 
components get corroded and rusted . Once the metal components attracts rust ,
they can't be put in the proper use . The rusted components have to be first cleaned
of rusting before being used . This is possible only by using RR-10 the ultimate 
3 in 1 Chemical.
RR-10 The safe 3 in 1 chemical .
RR-10  is a compound, based on acid reagent which is inhibited by an 
inhibitor and a mild addition of detergent to help remove oil or grease . Because 
of the inhibitors and the controlled acidic medium present in RR-10 , only the 
rust is removed from the metal surface and no damage is done to the metal , i.e.
Unlike ordinary 3 in 1 chemicals, it doesn't erase the metal surface itself.
 

Where to use and how to use RR-10 ? 
RR-10 can be used to remove rust from ferrous metallic components made of MS 
(Mild Steel), AS(Alloy Steel) and Cast Iron .These can be Furniture, 
Auto Components , Grill, Switch Gear Boxes, Electric Panels etc.
RR-10 can be used to remove rust from components which are to be painted and 
components which are to be fitted as OE(Original Equipment) .
Components which are to be painted
            If the component is having a mild , oily layer , apply RR-10 in cold
condition directly by a sponge, spray or brush depending upon the size of the
component. Allow the surface to dry (use a cloth to dry). Then apply liquid paint
or powder paint as desired .
RR-10 can be used in the ratio 1:3 with water at Room Temperature which will
remove rust and will leave a mild layer of phosphate coating which helps in paints
binding and durability to the painted surface and saves from further corrosion .